ProTek Series

Rod holder drains

Name: Rod holder drains
Brand: ProTek - Barji Marine
SKU: 44
Price: 25.00 AUD
Availability: InStock

$25.00 AUD

A low-profile drain that fits to the base of your rod holders and directs water safely into the bilge — protecting batteries, wiring and connections from saltwater ingress. Available to suit 51mm or 44mm rod holder tubes.

Quantity:

In stock

Shipping

Please note - we ship Mondays, Wednesdays and Fridays, with a cut-off time of 12pm.

Rod holder drains

One of the main causes of electrical issues in marine applications is saltwater ingress — and the most overlooked source of it is rod holders. Water runs straight down the tube, into the boat, and onto the wiring and connections you can't afford to lose.

PROTEK rod holder drains solve it. A simple, low-profile fix that directs water away from your electrical components and into the bilge where it belongs.

Installation takes less than five minutes. Apply a bead of silicone to the inside of the drain, push it up and over the bottom of the rod holder, then twist the drain so the outlet tail points in the direction you want the water to go. Connect a length of 13mm ID hose to the outlet (garden hose fits perfectly, as does the clear plastic tubing from Bunnings), and you're done.

Less than five minutes of work to save you thousands of dollars in repairs and headaches down the track.

Two models are available to suit the more common rod holder tube sizes — 51mm and 44mm — both with the same 13mm ID outlet tail.

Why ProTek?

Stops the most overlooked cause of electrical failure. Rod holders funnel saltwater straight onto your wiring — these stop it at the source.

Five-minute install. Silicone, push, twist, connect a hose. No drilling, no rewiring.

Universal hose fitment. 13mm ID outlet works with garden hose or standard clear tubing from Bunnings.

Printed in durable black PETG. Hard-wearing, UV-stable, built to live under your rod holders for years.

Upgrade Your Setup Today

Watch it installed on our Weekly Workshop Walkthrough series — head to our YouTube channel for the full episode.

Key Details

Compatibility: 51mm or 44mm rod holder tubes

Outlet: 13mm ID tail, fits standard garden hose or clear PVC tubing

Material: Hard-wearing black PETG

Install: Silicone bead, push-fit (under 5 minutes)

Tools required: Silicone applicator only

Overview

Rod holder drains

One of the main causes of electrical issues in marine applications is saltwater ingress — and the most overlooked source of it is rod holders. Water runs straight down the tube, into the boat, and onto the wiring and connections you can't afford to lose.

PROTEK rod holder drains solve it. A simple, low-profile fix that directs water away from your electrical components and into the bilge where it belongs.

Installation takes less than five minutes. Apply a bead of silicone to the inside of the drain, push it up and over the bottom of the rod holder, then twist the drain so the outlet tail points in the direction you want the water to go. Connect a length of 13mm ID hose to the outlet (garden hose fits perfectly, as does the clear plastic tubing from Bunnings), and you're done.

Less than five minutes of work to save you thousands of dollars in repairs and headaches down the track.

Two models are available to suit the more common rod holder tube sizes — 51mm and 44mm — both with the same 13mm ID outlet tail.